ネビュラ級

ネビュラ級

艦種：

探査艦

所属：

惑星連邦宇宙艦隊

建造拠点：

ユートピア・プラニシア造船所（火星）

開発開始：

2345年

就役：

2353年

全長：

442.23m

全幅：

318.11m

全高：

130.43m

重量：

3,309,000mt

速度：

ワープ9.6（最大12時間）
ワープ9.9（アップデート後）

デッキ数：

30

乗員数：

750名

武装：

タイプXフェイザー・アレイ×10基
魚雷ランチャー×2基

防御：

ディフレクター・シールド

ネームシップ：

USSネビュラ(NCC-60147)

状態：

現役 （2379年）

　ネビュラ級（Nebula-class）宇宙艦は、惑星連邦宇宙艦隊が保有する宇宙艦である。

歴史[]

　ネビュラ級は2345年より火星のユートピア・プラニシア造船所で開発が開始され、2353年に就役した。（Star Trek: Deep Space Nine Technical Manual）　一部の艦は2363年から2367年にかけて、地球軌道上のサンフランシスコ造船所やエリダヌス座40番星A宇宙艦隊造船所でヨーヨーダイン社によって建造が行われ就役している。（TNG:不実なる平和、TNG: クリンゴン帝国の危機・後編）

　ネビュラ級の主な任務は科学調査であるが、その他にもパトロールや輸送任務に就く場合もある。（DS9:愛の幻影、DS9: 夢の古代船、TNG:永遠の絆、TNG: 英雄症候群、TNG: エイリアン・ゲーム）

　また、ボーグの脅威に対してネビュラ級はウォルフ359の戦いやセクター001の戦いなどの戦闘にも参加している。（DS9:聖なる神殿の謎、スタートレック：ファーストコンタクト）　また、ドミニオン戦争においては第二次チントカ星系の戦いやカーデシアの戦い等の主要な戦闘に参加している。（DS9:変節の時、DS9: 終わりなきはじまり）

技術情報[]

デザイン[]

USS_Phoenix_and_USS_Enterprise-D.jpg

ネビュラ級とギャラクシー級宇宙艦。

　ネビュラ級とギャラクシー級の外観には共通のデザインが多数存在している。船体は円盤部と推進部で構成されており、ギャラクシー級のデザインと同一な円盤部モジュールの後方下部に推進部が直結し、円盤部と推進部の接地面のレベルからパイロンが推進部両側の側面から船体下部に向けて伸び、ギャラクシー級と同一のデザインのエンジン・ナセルが取り付けられている。（TNG:不実なる平和）

　推進部後方の上部には様々なモジュールを設置することができた。追加のエンジン・ナセル、魚雷ランチャーを備えたポッドや楕円形もしくは三角形のセンサー・ポッド等のモジュールがある。（TNG:クリンゴン帝国の危機・後編、TNG: 不実なる平和、TNG: 悪夢のホログラム、Star Trek Encyclopedia）

　2375年までにネビュラ級の第二船体のデザインには僅かな変更が加えられ、ギャラクシー級の第二船体の形状に近いものとなり、ディフレクター盤のデザインもギャラクシー級と同一となった。[1]（DS9:変節の時）

USS_Sutherland.jpg

三角形のセンサー・ポッド搭載型

USS_Phoenix.jpg

楕円形のセンサー・ポッド搭載型

USS_Phoenix_at_warp.png

USSフェニックスの後部

USS_Melbourne-dedication_model.jpg

追加のワープ・ナセル搭載型

Nebula_at_Qualor_II.jpg

ネビュラ級の残骸。追加のワープナセル搭載型

Nebula class at Chin'toka, 2375.jpg

第二船体に僅かに改装が加えられたタイプ

　2369年、ディープ・スペース・９の学校には古いモデルのネビュラ級の模型が飾られていた。（DS9:宇宙商人フェレンギ星人）

防衛システム[]

この記事は書きかけだ。是非とも、この記事に加筆してみて欲しい。記事を書く際は、画面上部の「編集」をクリックするように。

推進システム[]

補助艦艇[]

同型艦[]

• USSエンデバー
• USSサザーランド
• USSトゥカンブラ
• USSネビュラ
• USSファラガット
• USSフェニックス
• USSプロキシマ
• USSプロメテウス
• USSヘラ
• USSベレロフォン
• USSホンシュウ
• USSボンチューン
• USSメリマック
• USSモニター
• USSユリシーズ
• USSリーズ
• USSレキシントン
• 名称不明艦

付録[]

注釈[]

1. ↑ この僅かなデザインの変更は、従来のスタジオ・モデルによる撮影からCGIモデルを使用するようになったことが原因となった。

登場回[]

USS_Leeds_at_DS9.jpg

ネビュラ級はDS9のオープニングにも登場する。

• TNG
  • The Best of Both Worlds, Part II
  • Future Imperfect （モデル）
  • The Wounded
  • Redemption II
• DS9
  • Emissary
  • The Nagus （モデル）
  • Second Sight
  • Explorers
  • The Way of the Warrior（モデル）
  • The Visitor
  • Doctor Bashir, I Presume
  • Favor the Bold （ディスプレイのグラフィック）
  • Sacrifice of Angels
  • Waltz
  • The Reckoning
  • Take Me Out to the Holosuite
  • The Changing Face of Evil
  • What You Leave Behind
  • DS9: クリンゴンの暴挙以降のオープニング（USSリーズ）
• VOY
  • Non Sequitur
  • Message in a Bottle
  • Relativity
  • Endgame
• スタートレック映画
  • スタートレック：ジェネレーションズ
  • スタートレック：ファーストコンタクト

背景[]

Aside from the dedication plaque reference in "Redemption II" and "Second Sight", the Nebula-class was referred to by name in "The Wounded", and "Non Sequitur". It was additionally referred to by name in the script notes for "Redemption II".

スタジオ・モデル[]

First appearing as prototype kit-bash model in the debris field of The Best of Both Worlds, Part II, the design was upgraded to a full worthy studio model, to represent a major class of starship. As Michael Okuda explains on Doug Drexler's blog, "The original concept for the Nebula-class ship was to develop a design that was in the style that Andy Probert had so brilliantly established for the Enterprise-D. (You may recall that every other Federation starship in early TNG episodes was made with recycled movie ships.) Our initial hope was that Greg could use the same molds from the 4' Enterprise-D, but that he could add a bigger bridge and give it bigger windows. The idea was to suggest that this ship was a contemporary of the E-D, but it was a smaller vessel." [1]

『浮遊機械都市ボーグ』でのキットバッシュモデル[]

Ed Miarecki designed and built two proto Nebula-class vessels to appear in the debris field of the The Best of Both Worlds episode. Okuda remembers, "Nebula-class USS Melbourne. The original version of the Nebula. Ed made us two nearly-identical Melbourne models. I destroyed one of them to create a battle-damaged ship for BOBW2. (I recall being up in the art department one evening, Dremel tool in hand, cutting up the ship, while Patrick Stewart, in Borg costume, came upstairs to use the Xerox machine. He asked me what I was doing. I showed him the model and said something like, "See what you did!") Rick Sternbach helped with the battle damage, too. And Greg Jein contributed quite a bit of wreckage as well. The other Nebula model ended up on one of the side tables in Sisko's office in DS9. I think it was labeled "Melbourne," too."[2]

The models, built from parts of Galaxy級 AMT Star Trek model kits, No's 6618 and 6619, differed from its later definitive appearance in that they sported two smaller warp nacelles where the sensor pod was to be positioned and that the secondary hull was more elongated. Sisko's desk top model (having made two early appearances as desktop model in TNG: Future Imperfect、The Wounded), representing the destroyed Melbourne was refitted with a sensor pod after its first few appearances in Star Trek: Deep Space Nine.

For Emissary, the producers decided to use the more detailed Excelsior級 studio model to represent the USSMelbourne, thus robbing the proto-nebula from its name and registry. Stock footage of the now nameless distressed model is present in the episode (seen in the window of Sisko's escape pod, just as it leaves the doomed USSSaratoga), making it the only model to appear in both depictions of the Battle of Wolf 359.

物理的なスタジオ・モデル[] USS_Phoenix_studio_model.jpg

First appearance of the studio model as the USSPhoenix

Rear_view_of_studio_model_as_USS_Sutherland.jpg

Rear view of the model as USS Sutherland.

USS_Sutherland_studio_model.jpg

A later appearance as the USSSutherland

USS_Leeds_studio_model_on_tour.jpg

On tour as the USSLeeds/USSFarragut

The design upgrades for the Nebula-class were done by Mike Okuda and Rick Sternbach and the model was built by Greg Jein. In Drexler's blog, Okada elaborates further: "As so often happens with this kind of project, we didn't give Greg enough time to accomplish this, so we decided to retain the original scale of the Galaxy-class ship saucer. I suggested the original 'AWACS' pod in response to a producer's observation that the ship might otherwise appear unbalanced. Unfortunately, the AWACS pod didn't look as elegant as we had hoped in The Wounded. Rick Sternbach came to the rescue with the cool triangular pod that we used in later episodes." The time constraints could also explain why the USSPhoenix is not equipped with reaction control thruster assemblies. Fortunately, Jein was able to save time by using the molds of the recently constructed 4-foot Galaxy級 to cast the saucer section and the nacelles.

As to the apparent lack of impulse thruster on the model Sternbach commented in the same blog, "One of the rationalizations I imagined ages ago for having no obvious impulse grilles involved capturing and compressing the impulse fusion reaction exhaust and later releasing it from special non-propulsive ports. If the Nebula-class was employed in a stealthy surveillance mode, it would be smart to minimize all overboard emissions. Since most all 'modern' impulse engines involve little or no pure rocket thrust, but more of a sub-warp drive, one could say that the familiar orange Starfleet glowy exhausts could be modified or eliminated."[3]

The model was used extensively, redressed (mostly done by Drexler and Okuda) several times to represent multiple vessels in later seasons of Star Trek: The Next Generation and the first three seasons of Deep Space Nine. [4]

Nebula_class_alternate_sensor_pod_mock-up.jpg

The alternate sensor pod mock-up by Doug Drexler.

Nebula_class_redesigned_sensor_pod.jpg

Sternbach's re-design of the sensor pod (Notice the elongated secondary hull carried over from Miarecki's BoBW models).

When the shape of the sensor pod was reconsidered, Doug Drexler was also asked to come up with an alternative, "At one point, Dan Curry called Mike indicating that we may need an AWAC pod variant. We obliged by kludging one together. We ultimately did not use it.", Drexler remembered, who used amongst others, parts of a Miranda class model kit and computer keyboards.[5] Instead the producers followed Sternbach's re-design. Drexler's part, measuring 12"x11"x6", turned up on 8 August 2010 as Lot #76 in the Propworx' "Star Trek Prop and Costume Auction", estimated at US$600-$800, where it sold for US$350 (including buyer’s premium).[6]

Nebula_class_studio_model_after_refurbishment.jpg

Detail shots of the model after refurbishment.

Larry_Tan_and_John_Goodson_finishing_up_on_the_Nebula_class_studio_model.jpg

Modelers Larry Tan (l) and John Goodson putting the finishing touches on the refurbished studio model.

In 1994 the model underwent extensive refurbishment done at the Industrial Light & Magic workshop supervised by modeler John Goodson for スタートレック：ジェネレーションズ. The model was totally stripped from its original paint scheme (white with duck-egg blue highlights) and a new more detailed paint scheme, necessary to meet big screen requirements, was applied (blue-gray with metallic blue highlights) to represent the USSFarragut (Cinefex, No.61, 1994, page 69). In its new livery the model was used to represent the USSLeeds, for the upgraded opening title sequence of the last four seasons of DS9. Since no dorsal shots were made for this sequence, the Farragut decals on top of the saucer were not replaced. The last time the model was shot, was for a battle scene in スタートレック：ファーストコンタクト as an unnamed vessel (although the model was still wearing the Farragut/Leeds decals, the shot was composed in a way that name and registry were not discernible).

The physical studio model itself, worn and showing its age[7] has escaped the 40 Years of Star Trek: The Collection and It's A Wrap! sale and auctions, and is still in the possession of Paramount Pictures, having been on tour as late as 2011.

CGIモデル[]

For appearances in the later seasons of Deep Space Nine and Voyager a CGI model was built at Foundation Imaging in 1997 by Robert Bonchune, making its debut in VOY: Message in a Bottle. In a ploy that was reminiscent of what Jein had done, constructing the physical model, Bonchune said, "I got to have as reference, sitting at the front of my desk, the actual filming miniature! It was a good 4 feet across. In the effort to be expedient, I did "kitbash" existing parts of the CG USSEnterprise-D, but it still needed completely new parts and major changes to existing maps to match the miniature,". (Sci-Fi & Fantasy Models, No.32, 1998, page 54) The utilization of the parts of the Galaxy model went a long way explaining why the CGI Nebula differed slightly in appearance from its physical counterpart in that both the center line section of the secondary hull and the saucer rim were slimmer, suggesting one deck less each. The most significant difference was the change of the shape of the deflector dish housing to an oval shape akin to the Galaxy-class. Also, the CGI Enterprise-D sported the original gray-blue/duck-egg blue paint scheme, mapped onto that model from high resolution pictures taken from her four-foot physical counterpart, which was also transferred onto the Nebula model instead of the new paint scheme applied at ILM. [8]

Bonchune's model went on to make several appearances in and onto licensed Star Trek publications, most notably in the Star Trek: Ships of the Line calendars and their book derivative.

テクニカルマニュアル[]

The following information of specifications and defenses comes exclusively from the Star Trek: Deep Space Nine Technical Manual:

• Production Base: ASDB Integration Facility, Utopia Planitia Fleet Yards, Mars
• Type: Explorer
• Accommodation: 750 officers and crew; 130 visiting personnel; 9,800 personal evacuation limit
• Power Plant: One 1,500 plus Cochrane warp core feeding two nacelles; one impulse system
• Dimensions: Length, 442.23 meters; beam, 318.11 meters; height: 130.43 meters
• Mass: 3,309,000 metric tonnes
• Performance: Warp 9.6 for 12 hours (STD); warp 9.9 for 12 hours (UPRTD)
• Armament: Eight type-10 phaser emitters; two photon torpedo launchers

非正史[]

Nebula_class_Legacy.jpg

A Nebula-class ship in Star Trek: Legacy

• A cross section and overview of the ship is given in issue 154 of Star Trek: Communicator, particularly focusing on the "USS Nebula (NCC-60147)." The cross section shows that the ship is capable of saucer separation, has eight type-X phaser arrays and three photon torpedo launchers, and a mass of 3,309,000 metric tonnes. One inconsistency among the graphics has the registry number "NCC-60000" on the nacelle wing. All artwork used was provided by Tim Earls.
• In the video games Star Trek: Armada and Star Trek: Armada II, the Nebula-class is depicted as a "science ship"; that is, it has four special weapons where other ship classes have just one. The special weapons allow the Nebula-class to disrupt enemy shields, destroy incoming torpedoes, temporarily duplicate an allied ship, or send an engineering team to an allied ship or station to repair its systems.
• In the video game Star Trek: Bridge Commander, there are four Nebula-class vessels. Three of these, the USS Nightingale, USS Khitomer and USS Berkeley, appear to be made specifically for the game and do not appear anywhere in Star Trek canon. The fourth Nebula-class vessel featured in the game is actually a canon ship, the USS Prometheus (NCC-71201), though it is the only one that doesn't play an important role in the game.
• In Star Trek: The Next Generation - Birth of the Federation the Nebula class is the Strike Cruiser of the Federation; a short range combat vessel mostly intended for planetary bombardment.
• In Star Trek Online, the Nebula-class is an "advanced research science vessel" that can create tachyon detection fields and grids which boost stealth detection and sensor abilities.

外部リンク[]

• ネビュラ級：非正史スタートレックWiki Memory Beta英語版
• Proto-Nebula Class Reconstruction　サイト名 Ex Astris Scientia
• Nebula Class Observations　サイト名 Ex Astris Scientia

特に記載のない限り、コミュニティのコンテンツはCC BY-NCライセンスの下で利用可能です。